Home > Dissolvable Bridgeplug > Bridge plugs

2.281” WRBP-1 BRDGE PLUG

The 'Wide-Range" Bridge Plug is a specially designed plug to run through tubing or restricted pipe and set securely in the larger tubing of casing below. This performance can save time and money.

INQUIRY PDF Format

Description

Features/Description

Runs through tubing to set in larger tubing of casing
Sets securely in any hardness casing up to and including P-110
Ribbed cones guide slips for even placement in casing
Three-piece rubber packing elements in conjunction with rocker action metal back-up rings
One-piece slips virtually eliminate premature setting
Ratchet lock ring retains setting force assuring compression of packing element regardless of pressure differentials
Recommended for high temperatures and pressures
Can be set either with GO,Baker of Gearhart wireline setting tools
New feature we added 5/8 sucker rod thread to all bottem shoes

DESCRIPTION
The 'Wide-Range" Bridge Plug is a specially designed plug to run through tubing or restricted pipe and set securely in the larger tubing of casing below. This performance can save time and money. Because of the extreme setting range, this plug is not pressure rated nor guaranteed although it is designed to withstand differential pressure of 10,000 psi at 350F degree and has been successfully tested to such.
The "Wide-Range" Bridge Plug use opposed case hardened slips above and below a three piece rubber packing element. The three-piece packing element is contained by rocker action metal back-up rings which virtually eliminates extrusion of the packing element at high temperatures and pressures. a ratchet lock ring retains the setting force assuring the compression of the packing element to apply a constant sealing pressure. The one piece slips are designed to set securely even in P-110 casing. They are specially heat treated making them hard outside for gripping and softer inside for easier milling.
To assure proper setting of the small diameter plug, special ribbed cones guide the slips to evenly spaced positions against the pipe. Should it be necessary to drill-out a Wide Range Plug, a milling process is recommended. The mild steel used in the plug is more readily handled in this manner.
All Wide Range Bridge Plugs should have cement or sand placed on top before further operations are performed on the well. This measure prevents shock damage to the plug.

Operating Instructions

Specifications
Plug OD	Setting Range		Shear Stud
	Min	Max
2.281	2.441	3.343	13，000lbs

Wireline Setting Equipment
Adapter Rod	Setting Sleeve	Setting Nut	Wireline Setting Tool
Adapter Rod	Setting Sleeve	Setting Nut	MAP / GO / Gearhart
Not Req'd	D260000091	Not Req'd	2 1/8" OD M.S.S.T.
Not Req'd	D260000061	Not Req'd	1 11/16” OD M.S.S.T