Electro-Mechanical Plug Setting Tool

Name: Electro-Mechanical Plug Setting Tool
Brand: Sharp Razor oil tools
Availability: InStock
Rating: 5 (1 reviews)

Setting bridge plug/packer;
As a power unit, it can be connected to other modules to realize functions such as punching/fishing/milling/crawler;
Characteristics
Can be used by E-line/slickline/coiled tubing/tubing;
The cable operation does not need se

INQUIRY PDF Format

Description

Application

Setting bridge plug/packer;
As a power unit, it can be connected to other modules to realize functions such as punching/fishing/milling/crawler;

Characteristics

Can be used by E-line/slickline/coiled tubing/tubing;
The cable operation does not need separate ground panel configuration, does not need continuous cable power supply, only needs to transmit the electrical signal to start work automatically.
A new circuit is used for each well to eliminate the instability of electronic tools
No pressure is generated inside the instrument, conforming to HSE standards
Tools are available in three sizes, ranging from 135 °C to 225 °C, two material grades, and two setting speeds;
Equivalent to Baker #10 and Baker #20

Advantage

Non-explosive, non-hydraulic power, no suppress, no external force other than electricity, and it can be used with cable/slickline/coiled tubing/tubing.
Stroke performance is good, and it can be used for perforation.
According to the needs of the user, the lever can be set pull up, also the lever can be set push down.
Multiple patent protection;

Technical parameters

OD	1-11/16"	2.125"	2.75（No perforation）	2.75"（perforation）	3.6"
Maximum Operating Pressure	15000 psi (normal) 20000psi(customized)	15000 psi (normal) 20000psi(customized)	15000 psi (normal) 20000psi(customized)	15000 psi (normal) 20000psi(customized)	15000 psi (normal) 20000psi(customized)
Maximum Operating Temperature	135℃, 6 hours 150℃, 2 hours	135°C [275°F] up to 6hrs, 225°C [437°F] up to 6hrs with external flask	135°C [275°F] up to 6hrs, 225°C [437°F] up to 6hrs with external flask	135°C [275°F] up to 6hrs, 225°C [437°F] up to 6hrs with external flask	135°C [275°F] up to 6hrs, 225°C [437°F] up to 6hrs with external flask
Length	52" （132cm）	50" （128cm）	52" （134cm）	48" （122cm）	48" 122cm
Stroke Length	12"	10"	10"	5.5"	10"
Material	4140 (normal) 718 (customized)	4140 (normal) 718 (customized)	4140 (normal) 718 (customized)	4140 (normal) 718 (customized)	4140 (normal) 718 (customized)
Nominal Force	15000lbs 6.8t	30000lbs,13t(常规) 45000lbs,20t(定制)	40000lbs,18t(常规) 50000lbs,22t(定制)	30000lbs,(常规)	60000lbs,27t(常规) 90000lbs,40t(定制)
Setting Rate	0.5"/min	0.5"/min	0.5"/min	2"/min	0.5"/min
Outside Diameter	1-11/16"	2.125"	2.75"	2.75"	3.6"
Stroke Time	20min	17min	17min	3min	17min
Bridge Releasing Time(probably)	7-17min	7-10min	7-10min	25min	7-10min
Operation Type	Slickline/E-Line	Slickline/E-Line	Slickline/E-Line	Slickline/E-Line	Slickline/E-Line
PCM	Slickline module E-Line module Perforation module	Slickline module E-Line module Perforation module	Slickline module E-Line module Perforation module	Slickline module E-Line module Perforation module	Slickline module E-Line module Perforation module
PCM power volume	perform a tool surface test, perform a RIH for setting job, perform a reset after completing setting job, or tool surface test 5 times	perform a tool surface test, perform a RIH for setting job, perform a reset after completing setting job, or tool surface test 5 times	perform a tool surface test, perform a RIH for setting job, perform a reset after completing setting job, or tool surface test 5 times	perform a tool surface test, perform a RIH for setting job, perform a reset after completing setting job, or tool surface test 5 times	perform a tool surface test, perform a RIH for setting job, perform a reset after completing setting job, or tool surface test 5 times
PCM Recovery	Free recovery by SHARP RAZOR	Free recovery by SHARP RAZOR	Free recovery by SHARP RAZOR	Free recovery by SHARP RAZOR	Free recovery by SHARP RAZOR