Home > CT Wellbore Clean-out Tools > Wellbore Clean-out Tools

Slimline Wash Tool ( Double Flapper)

INQUIRY PDF Format

Description

Slimline Wash Tool ( Double Flapper)

1. Description

The Slimline Wash Tool is composed of Roll-On Connector, Double Flapper Check Valve and Jetting sub. The overall length is much shorter than conventional wash tool. Jetting nozzle can be replaced easily according to operation.
2. Features
* Easy to make up/break out
* Two removable flapper cartridges
* Different jetting sub available
3.Specifications

OD	ID	Make-up Length	Working Condition	Connection
1 1/2’’	0.57’’	14.3’’	Standard	Roll On Connector
1 3/4’’	0.71’’	14.3’’	Standard
2’’	0.71’’	16.1’’	Standard
2 3/8’’	1’’	16.1’’	Standard
2 7/8’’	1.22’’	23’’	Standard
1 1/2’’	0.57’’	14.3’’	H₂S	Roll On Connector
1 3/4’’	0.71’’	14.3’’	H₂S
2’’	0.71’’	16.1’’	H₂S
2 3/8’’	1’	16.1’’	H₂S
2 7/8’’	1.22’’	23’’	H₂S

Concentric Coiled Tubing Wash Tool (Single Mode)

1. Description

Single Mode concentric coiled tubing wash tool works with concentric CT to remove solids and liquids from ultra-low-pressure wellbores that are not treatable with standard circulation tool.
Washing Mode: pump fluid into the inner pipe, the fluid will be accelerated spirally to wash the debris, sand which is attached to the sidewall. The fluid which is fully stirred up goes through the filter screen into the annuals of concentric coiled tubing and back to the wellhead.

2. Features

Special concentric connector, quick and robust construction
Self-cleaning filter
High performance spirally washing
Negative pressure washing

3. Specifications

Coiled Tubing	Length	Working Condition	Flow Rate	Working Pressure
2’’x1’’	43.4’’	Standard	80-90L/min	3MPa
2.375’’x1.25’’	48.5’’	Standard	80-90L/min	3MPa
2’’x1’’	43.4’’	H₂S	80-90L/min	3MPa
2.375’’x1.25’’	48.5’’	H₂S	80-90L/min	3MPa

Concentric Coiled Tubing Wash Tool(Multi-mode)

1. Description

Concentric coiled tubing wash tool works with concentric CT to remove solids and liquids from ultra-low-pressure wellbores that are not treatable with standard circulation tool. Debris and other partials from the wellbore are washed out of the well through the annulus between coiled tubing. This tool is designed with Washing mode, Jetting mode, Forceful Vacuum mode, three mode can be switched by changing flow rate.

2. Features

Multiple operating mode
Self-cleaning filter
High performance spirally washing

3. Specifications

Coiled Tubing	Length	Working Condition	Flow Rate	Working Pressure
2’’x1’’	57’’	Standard	80-90L/min	3MPa
2.375’’x1.25’’	62’’	Standard	80-90L/min	3MPa
2’’x1’’	57’’	H₂S	80-90L/min	3MPa
2.375’’x1.25’’	62’’	H₂S	80-90L/min	3MPa