Metal Dissolvable Bridgeplug

Item No.: 001

Metal Seal dissolvable frac plug is a revolutionary design with metal seal, bringing a better dissolution performance. MBP MS provides larger ID, shorter length, better pump-down ability, and a shorter total dissolution time. Without rubber component, the

INQUIRY PDF Format

Description

Features

Better dissolution and pressure holding performance with metal seal.
Accurate Dissolution Times Based on Salinity and Temperature Variables
Better pump-down ability with compact design
Large Bore Size – Resulting in Higher Flow Back and Faster Dissolution
Ultra-short length, 60% shorter
Compact Tool Length of 8” Results in Faster Dissolution and Less Material
Pressure rating up to 10,000 psi
Sets with Standard Baker 10 or Baker 20 Setting Tool

Liner Data
Liner OD	127	mm
Liner wall thickness	9.2	mm
Metal grade	N-80
Liner ID	108.6	mm
Liner Hanger Depth	3755	m
Frac Data
Maximum well pressure (surface)	10000	psi

Completion Plug Data
The installation stage of the packer	After Frac Job
The type of liquid during the installation of the packer tube	Fresh Water
Formation Tempreture	104	°С
Formation Pressure	32.7	Mpa
Expected pressure at the wellhead		Mpa
H2S content in the well		%
Number of days that plug can withhold the pressure of 70 Mpa or 35 MPa for	not less than 30	days
Full dissolution of the plug	not longer than 90	days
Chloride content in formation fluid	3	%
Type of kill fluid to create an additional safety barrier	CaCl
The maximum permissible density of the kill fluid (safety barrier above the plug)	1.25	g/cm3